INTERNAL DIVISIONS (Internal Hollow Core Door)
August 16, 2011 Leave a Comment
Internal 44mm Thick Hollow Core Door, size 813 x 2032mm high
The doorset in a wall opening, for walking through, or on a cupboard. External doors are used for access and internal doors for communicating. Single and double doors are usually side-hung, but there are other types, e.g. flexible, sliding, swing, revolving, folding, and up-and-over. Special doors are used against fire or smoke.
In Revit, the door is drawn using a Door family which provides a count measurement to SkyBIM.
Example: Internal Hollow Core Door
SkyBIM Product Editor Ingredients
Single leaf Hollow Core Door
Count = Revit Door Count. See SkyBIM’s Consumption Formula Editor.
Steel fame for single door
Count = Revit Door Count
Precast concrete lintol to be installed above door
Length = Manual Door Width + (0.3*2 allowance)
Enamel paint on door general surfaces
Area = Manual [(Door Width * Height)*2 + Door Thickness * (Door Width + Height*2)]
Enamel paint on pressed steel door frames
Area = Manual Frame Thickness * (Door width + Height*2)
Set up and build in single leaf door frame not exceeding 2.50m2
Number = Revit Door Count
Heavy duty brass hinges
Count = Manual [2 pairs of hinges]
Two lever lock including furniture
Count = Revit Door Count
SkyBIM Product Editor Screenshot
SkyBIM Product Editor Live Link
SkyBIM Report View
