INTERNAL DIVISIONS (Half Brick Walls)

Internal Half Brick Wall 90mm Thick

A brick wall is a wall made up of courses of bricks laid in mortar according to a bond, used for cladding and infilling.
In Revit, the one brick wall is drawn using a Basic Wall family which provides quantity, length, area and volume measurements to SkyBIM’s Product Editor.

Example: Internal Half Brick Wall 90mm Thick

SkyBIM Product Editor Ingredients

Half brick walls
Area = Revit Basic Wall Area. See SkyBIM’s Consumption Formula Editor.

Brick reinforcement to brick walls
Length = Revit Basic Wall Length * [(Wall Height {Manual} / Brick Thickness {Manual}) / Number of Brick Courses {Manual}]

Softboard joint between wall and surface bed not exceeding 300mm high
Length = Revit Basic Wall Length

Rake out softboard joint and seal with polysulphide joint sealer
Length = Revit Basic Wall Length

One coat plaster to one brick walls
Area = Revit Basic Wall Area * 2

Extra over for one coat skim coat plaster finish on brick walls
Area = Revit Basic Wall Area * 2

Two coats Acrylic PVA paint applied to plastered walls
Area = Revit Basic Wall Area * 2

SkyBIM Product Editor Screenshot

SkyBIM Product Editor Live Link
http://bit.ly/rk15hJ

SkyBIM Report View

SkyBIM Consumption Formula Editor Example

Advertisement